Features and Functions | 2 |
Soft Front Panel Operation
Click Mod and select FSK as shown in Figure 2- 22. To output the FSK waveform, configure the settings for the carrier frequency, output amplitude, offset voltage, “hop frequency”, and FSK rate.
Figure 2-22 Panel view of FSK
Remote Interface Operation
FSKey:STATe {0OFF1ON}
Carrier Waveform
The FSK carrier waveform consists of Sine, Square, Ramp, Triangle, or Arbitrary waveform. The default carrier waveform is Sine wave. You cannot use Pulse or DC as the carrier waveform.
Soft Front Panel Operation
For Arbitrary waveforms, click Arb at the top panel as shown in Figure 2- 2 and select the desired waveform
from the drop down list as shown in Figure 2- 16.
U2761A User’s Guide | 67 |