2 Features and Functions
Soft Front Panel Operation
Click Mod 
and then select FM 
as shown in Figure 2- 18. To output the FM waveform, configure the settings for the carrier frequency, output amplitude, offset voltage, modulating frequency, deviation, and the desired waveform.
Figure 2-18 Panel view of FM
Remote Interface Operation
FM:STATe {0OFF1ON}
Carrier Waveform
The FM carrier waveform consists of Sine, Square, Ramp, Triangle, or Arbitrary waveform. The default waveform is Sine wave. You cannot use Pulse or DC as the carrier waveform.
Soft Front Panel Operation
For Arbitrary waveforms, select Arb 
at the top panel as shown in Figure 2- 2 and select the desired waveform
from the drop down list 
as shown in Figure 2- 16.
56 | U2761A User’s Guide |
