1 Getting Started

Chassis Installation

The L-mount kit is to be installed to your U2761A module. The following instructions describe the simple procedure of installing the L-mount kit and your module in the U2781A chassis.

1Unpack the L-mount kit from its packaging.

2Remove your U2761A module from the bumper casing.

3Using a Phillips screwdriver, fasten the L-Mount kit to your U2761A module.

4Insert your U2761A module into the U2781A chassis with the 55-pin backplane connector positioned at the bottom of the module.

5Once you have slotted the module into the chassis, tighten the screws of the L-mount kit to secure the connection.

24

U2761A User’s Guide

Page 42
Image 42
Agilent Technologies U2761A manual Chassis Installation