19.Flip the cart over so that it rests on its wheels.

20.Assemble the front tongue on top of the rear tongue using three 3/8" x 3" hex bolts and 3/8" hex lock nuts. See figure 12.

HINT: For easier assembly, support the rear tongue with a block of wood.

21.Assemble the hitch pin to the hitch bracket and tongue, securing it with the 1/8" hair cotter pin. See figure 12.

HITCH PIN

3/8" x 3"

HEX BOLT

TONGUE (FRONT)

3/8" HEX

 

 

 

LOCK NUT

BLOCK

1/8"

HAIR

 

 

 

 

COTTER PIN

FIGURE 12

24.Assemble the engine to the tongue using two 3/8" x 3" hex bolts in the rear holes, two 3/8" x 1" hex bolts in the front holes and four 3/8" nylock nuts. See figure 14.

HINT: Use caution when assembling engine to tongue.Have another person assist you if you are having difficulty. HINT: For easier assembly, support the tongue with a block of wood.

3/8" x 1"

HEX BOLT

3/8" x 3"

HEX BOLT 3/8" NYLOCK NUT

FIGURE 14

22.Attach the plastic elbow to the top of the engine housing using four 5/16" x 3/4" hex bolts (self tapping) and nylon washers. See figure 13.

HINT: Push in on hex bolts as you tighten to form threads.

23.Connect the hose adapter to the engine housing by fastening three wing nuts to the pre-assembled bolts in the engine housing. See figure 13.

25.Place the hose hanger rod down into the hose hanger bracket on the impeller housing assembly. See figure

15.

HOSE HANGER ROD

NYLON WASHER

5/16" X 3/4"

HEX BOLT (SELF TAP)

WING NUT

FIGURE 13

FIGURE 15

9