Aiphone IS installation manual Mounting When mounting on a wall, Back wiring, Surface wiring

Color monitor master station (IS-MV)

*For the part names and their functions, see the OPERATION MANUAL.

■Accessories

・Mounting bracket × 1 ・Desktop stand × 1 ・Tie-wrap × 1

・Name plate × 1

・Name card × 1

・Screw (15mm (5/8"), for wall-mounting) × 4 ・Screw (25mm (1"), for gang box) × 4

・Screw (10mm (7/16"), for desktop stand) × 4 ・China RoHS paper × 1

■Mounting

When mounting on a wall

<Back wiring>

Name card × 1 (included*1)

3

Mount the unit on the mounting bracket.

3-gang box NOTE:

A single-gang box can also be used for wiring. When using

The unit

CAT5e/6 cable

a single-gang box, fasten the mounting bracket to the wall directly by using the screw holes for 3-gang box.

Name plate × 1 (included*1)

Filling in the target names on the name card

1Remove the transparent name plate by pushing either upper or lower side of the

plate.

*Remove the name card if necessary. 2 Fill in the target names on the white

space of the name card.

3 Replace the name plate.

*1: The name plate and name card are attached to the unit with shipment.

<Surface wiring>

Mounting bracket

(attached to the unit with shipment)

Screw (for gang box) × 4 (included)	1 Fasten the mounting
	bracket to the wall.
Option wires

2 Connect the CAT5e/6 cable and option wires to the unit.

Connect the CAT5e/6 cable and option wires to the unit and route them as shown.

92mm (3-5/8")

83.5mm (3-5/16")

Mounting bracket

(attached to the unit with shipment)

Screw (for wall-mounting) × 4 (included)

The unit

18