
Setting time and date [Time and date setting]
Set the time and date of the system, used for chime schedule and transfer schedule.
1 Click Time and date setting in the table of contents.
2 Set the following settings.
•[Set current time] Required :
Set the current time and date in one of the following methods.
•Input the current time and date manually, and then click Manual setting .
•Click Synchronized with PC to set the current time and date by making it synchronized with the PC.
•You can also set the current time and date by making it
synchronized with NTP server [Synchronized with NTP server] as shown below.
*If there is no power supply to the system for a long time because of power failure etc., the time and date setting may be cleared.
•[NTP (Network Time Protocol)]:
Set [Synchronized with NTP server] to ON to set the current time and date by making it synchronized with NTP server. Then set the [NTP server] and [NTP port number].
*[NTP server]:
Enter the IP address or domain name of the NTP server to be used as the master clock.
•[UTC time zone]:
Set the time differences from Coordinated Universal Time (UTC). Set the [Hour difference] and [Minute difference] respectively.
•[Synchronize interval]:
Set the time data acquisition interval (hour) from the NTP server, and the interval of synchronization with the system.
•[Daylight savings time]:
Set whether to utilize daylight savings time (ON) or (OFF). When set to ON, then set the start and end times (Month, Week of the month, Day of the week, Hour and Minute), and time differences (Hour and Minute).
*It is recommended to connect the system with a PC or NTP server constantly to keep the correct time and date setting.
3 Click Temporarily stored to save the current setting results temporarily.
*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.
Downloading/uploading setting data [Setting file]
You can download the setting data you have made into a file and save it on the PC. On the contrary, you can upload the setting data from the PC.
*It is recommended to download the setting data as a backup copy after you finish making settings or setting changes.
■When downloading setting data onto the PC
1 Click Downloading setting data in the table of contents.
2 Click Download to download the current setting data into a file.
NOTE:
It is recommended that you also save the registered MP3 files separately.
■When uploading setting data
1 Click Uploading setting data in the table of contents.
2 Click Upload to upload the setting data from the PC to the system.
You can select the setting data file from another window, and upload it.
3 Update the system.
*Refer to “Updating the system” below.
NOTE:
Uploading the setting data will overwrite the current data.
*Upload sound files separately to register them as the internal sound sources.
Updating the system [Updating the system]
Update the system with the setting data you have entered (currently stored temporarily).
1 Click Updating the system in the table of contents.
2 Click Update to update the system with the setting data currently stored temporarily.
NOTE:
Do not turn off the system while updating the system.
22