Web Configuration Utility
The Web configuration utility allows you to configure settings for the Access Point. In order to access the web configuration utility, you’ll need to assign a static IP address to your computer. Please refer to the previous section on how to assign a static IP address to your computer and then proceed with the steps below.
Step 1 Open the web browser and type in 10.0.0.1 in the address field and press Enter.
Step 2 Enter admin for both the user name and password and click OK.
You will see the home page for the web configuration utility.
The Current Status page shows the current IP Information and Wireless Settings of the Access Point. To change any of these settings, click on the Advanced Setup link.
12
