Airlink101 AP411W

Step 4 Select Use the following IP address and enter an IP address of 10.0.0.x (where

x is any number between 2 - 254). Also enter 255.0.0.0 for the Subnet mask and

10.0.0.1 for the Default gateway and click OK.

Step 5 Click Close.

Step 6 Open the web browser and type in 10.0.0.1 in the address field and press Enter.

Step 7 At the login screen, enter admin for both the user name and password, and click

OK.

Contents

Main Users Manual Table of Contents Package Contents System Requirements for Configuration: Introduction Connections LEDs Wireless Basics Installation Considerations Connecting the Access Point Page Page Page Page Page Web Configuration Utility Advanced Setup Page Page Page Page Page Page Page Page Page Page Page Page Statistics Page Troubleshooting Check that the LAN LED on the 108Mbps SuperG Wireless Access Point is ON. If the LED is not Check that the Ethernet adapter is working properly. Check that the IP address is in the same range and subnet as the 108Mbps SuperG Wireless 2. The wireless client cannot access the Internet in Infrastructure mode. 3. What variables may cause my wireless products to lose reception? 4. Why does my wireless connection keep dropping? 5. Why cant I get a wireless connection? 6. I forgot my encryption key. Page Technical Specifications _ _ 0dBm gain with reverse SMA connector Orthogonal Frequency Division Multiplexing (OFDM) E-mail: support@airlink101.com Toll-Free: 1-888-746-3238 Web Site: www.airlink101.com