Parameters | Description |
Enable WPS | Check this box to enable WPS function, uncheck it to disable |
| WPS. |
WPS Information | |
| WPS Status: If the wireless security (encryption) function of this |
| wireless router is properly set, you’ll see “Configured” message |
| here. If wireless security function has not been set, you’ll see |
| “unConfigured”. |
| PinCode Self: This is the WPS PIN code of this wireless router. |
| This code is useful when you need to build wireless connection |
| by WPS with other |
| SSID: The SSID of this wireless router will be displayed here. |
| Authentication Mode: The wireless security authentication mode |
| of this wireless router will be displayed here. If you dont enable |
| security function of the wireless router before WPS is activated, |
| the router will auto set the security to WPA (AES) and generate a |
| set of passphrase key for WPS connection. |
| Passphrase Key: The wireless security key of the router will be |
| displayed here. |
Config Mode | There are “Registrar” and “Enrollee” modes for the WPS |
| connection. When “Registrar” is enabled, the wireless clients will |
| follow the router’s wireless settings for WPS connection. When |
| “Enrollee” mode is enabled, the router will follow the wireless |
| settings of wireless client for WPS connection. |
Configure by Push Button | Click “Start PBC” to start |
| procedure. This wireless router will wait for WPS requests from |
| wireless clients for 2 minutes. The “WLAN” LED on the wireless |
| router will be steady on for 2 minutes when this wireless router is |
| waiting for incoming WPS request. |
Configure by Client PinCode | Please input the PIN code of the wireless client you wish to |
| connect, and click “Start PIN” button. The “WLAN” LED on the |
| wireless router will be steady on when this wireless router is |
| waiting for incoming WPS request. |
|
|
50
