OPERATION

INSERTING TAPES

●You can select a reverse mode to play back one or both sides.

●Use only type I (normal) tapes.

Press the TAPE button and press the 4 mark to open the cassette holder.

PLAYING BACK A TAPE

Insert a tape, Then press the +b Ibutton to start play.

The tape counter indicates the tape running length

Playback side of the tape

b: The front side is being played (forward). “< : The back side is being played (reverse).

To stop play, press the ■ button.

To pause play, press the II button. ‘Toresume play, press again. To change the playback side, press the <E button in play mode.

To fast forward or rewind, press the ++ c,r P> button in stop mode. Then press the ■ button to stop the tape.

To start’play when the power is off (Direct Play

Function)

Press the TAIJE button. The power is turned on and play of the inserted tape begins,

To set the tape counter to 0000

Press the W button in stop mode.

The counter is also set to 0000 when the cassette holder is opened.

Insert a tape with the exposed side down. Push the cassette holder to close.

To select a reverse mode

Each time the TAPE button is pressed, the reverse mode changes.

I

To ~lav one side onlv, select =.

To play from front side to back side once only, select 1). To play both sides repeatedly, select (=).

About cassette tapes

●To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver c)r other pointed tool.

‘o

‘;c@ \

\~a7

@

Side A G[

Tab of side A

 

 

lb’

To record on the tape again, cover the tab openings with adhesive tape, etc.

\

<c@

1

/

*

G

●120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

●Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.

\ La–

‘J )

@$

1

11 HIGHS(+