Al EDIT RECORDING

3

4

3u,-

55

FUNCTION

■

The Al edit function enables CD recording without worrying about tape length and track length, When a CD is inserted, the unit automatically calculates track lengths. If necessary, the order of tracks is rearranged so that no track is cut short.

(Al: Artificial Intelligence)

m

Al edit recording will not start from a point halfway into the tape. The tape must be recorded from the beginning of either side.

Use the remote control from steps 3 to 5.

Insert the tape into the deck.

Insert the tape with the side to be recorded on first facing out from the unit.

Press the CD button on the main unit so that “CD” is displayed, and load the disc.

You can press the FUNCTION button on the remote control

repeatedly to display “CD”.

Press the EDIT/CHECK button once while pressing the SHIFT button.Press the numbered buttons to designate the tape length.

10 to 99 minutes can be specified.

Example: When using a 60-minute tape, press the 6 and O buttons.

In a few seconds, the microcomputer determines the tracks to be recorded on each side of the tape.

●The 44 and * buttons are also available to designate the tape length.

Tape length

Tape

side A

Remaining time

(front

side)

of side A

Number of

Selected

tracks

programmed tracks

for side

A

5 First press the ● button and then press the * button within 2 seconds to start recording.

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front (side A) ends, recordllng on the back (side B) starts.

To stop recording

Press the ❑ button. Recording and CD play stop simultaneously.

To clear the edit program

Press the ■ button twice.

To check the order of the programmed track numbers

Before recording, press the EDIT/CHECK button while pressing the SHIFT button to select side A or B, and press the ➤> button repeatedly.

Program Programmed

number track numbers

Track number

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can program tracks to use the extra time.

●Recording is inhibited if the erasure prevention tab on eitlher side of the tape is broken off.

●The Al edit function cannot be used with discs containing 31 tracks or more.

13 ENGLISH