CONNECTIONS

This system may be powered by an AC voltage or car battery (.3C 12 V) power source. (Aiwa DCW-50 car battery cord is available as an optional accessory, For details, please refer to page 17.)

Elefcwe connecting the AC cord

The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local voltage.

IMPORTANT

Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord or car battery cord in the end,

There are no differences between the front speakers. Both speakers can be connected as L (Left) or R (Right).

1’ Connect the speaker cords to the main unit.

The cords with the white stripes should be connected to the

~terminals and the other cords to the O terminals.

2 Connect the supplied antennas.

Connect the FM antenna to the FM 75 Q terminals and the AM antenna to the AM LOOP terminals.

AM LOOP antenna

3 Connect the AC cord to an AC outlet.

m

Do not short-circuit the ~ and ~ speaker cord leads, otherwise the sound may become inaudible or the unit may be turned off. If this happens, disconnect the AC cord from the AC outlet and re-connect the speaker cord correctly. Connect then the AC cord and turn the unit on again.

2 FM antenna

r

d

@

11(

-3

:3 ENGLISH