PROGRAMMED EDIT

RECORDING

3,7 4,5

3,7 4 m

8

FUNCTION

Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed.

m

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side.

Use the remote control from steps 3 to 8

1 Insert the tape into the deck.

Insert the tape with the side to be recorded on first facing out from the unit,

2 Press the CD button on the main unit so that “CD” is displayed, and load the disc.

You can press the FUNCTION button on the remote control

repeatedly to display “CD,”

3 Press the EDIT/CHECK button twice while pressing the SHIFT button.4 Press the numbered buttons to designate the tape length.

10 to 99 minutes can be specified.

Example: When using a 60-minute tape, press the 6 and O

buttons.

●The 44 and - buttons are also available to designate the tape length.

5 Press the numbered buttons to program a track.

Example: To select the 10th track, press the numbered buttons

+10 and O.

6 Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time

cannot be programmed.

Selected track Program

numbernumber

Remaining time of side A Programmed tracks

7 Press the EDIT/CHECK button while pressing the SHIFT button to select side B and program the tracks for side B.

After confirming B on the display, repeat step 5.

Tape side B (reverse side)

I

8 Press the O button and then press the> button

 

within 2 seconds to start recording.

m

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.

To stop recording

Press the ❑ button, Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press the EDIT/CHECK button while pressing the SHIFT button to select side A or B, and press the EP button repeatedly.

Track number Program number

Programmed tracks

To change the program of each side

Press the EDIT/CHECK button while pressing the SHIFT blJtton to select side A or B, and press the ■ button to clear the program of the selected side. Then program tracks again.

To clear the edit program

Press the ❑ button twice.

m

Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.

ENGLISH 14