Aiwa NSX-AV800 Continuous Play, Pilaying Back A Tape, Music Sensor, To set the tape counter to

PILAYING BACK A TAPE

DO1.BY

Insert a tape,

1 Press the DOLBY NR button and turn Dolby NR

on or off to match the playback tape.

For tapes recorded with DOLBY NR, turn on IIU NR. For tapes recorded without DOLBY NR, turn off DO NR.

2 Press the + ➤ button to start play.

The tape counter indicates the tape running length.

I

Playback side of the tape

➤: The front side is being played (forward).

<: The back side is being played (reverse).

When tapes are loaded in both decks

Press the TAPE button first to select a deck.

The selected deck number is displayed.

To stop play, press the ❑ button.

To pause play (deck 2 only), press the II button. To resume play, press again.

To change the playback side, press the 4> DIRECTION/ PRESET button in play or pause mode.

To fast forward or rewind, press the <+ or E> button in stop mode. Then press the ■ button to stop the tape.

To start play when the power is off (Direct Play Function)

Press the TAPE button. The power is turned on and play of the inserted tape begins.

To set the tape counter to 0000

Press the ❑ CLEAR button in stop mode.

The counter is also set to 0000 when the cassette holder is opened.

MUSIC SENSOR

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily.

When the F indicator of the +E button is flashing, press the >b button to move to the next track or the <4 button to move to the beginning of the current track.

When the < indicator of the +> button is flashing, press the +< button to move to the next track, or the k> button to move to the beginning of the current track.

The search function uses a music sensor that may not be able to detect tracks for tapes with:

●Blanks of less than 4 seconds between tracks

●Noisy blanks

●Long passages of low-end sound

●Low overall recording levels

CONTINUOUS PLAY

After playback on one deck finishes, the tape in the other deck will start to play without interruption.

1 Insert tapes into deck 1 and deck 2.

2 Press the TAPE/DECKl/2 button to select the deck to be played back first.

3 Press the REV MODE button to select Z).

4 Press the <> button to start playback.

Playback continues until the ❑ button is pressed.

ENGLISH 10