Aiwa NSX-AV800 manual Dsp Surround System, Graphic Equalizer, Sound Adjustment During Recording

GRAPHIC EQUALIZER

PA– —-- —- — — — — -*B

. GEQ

__–_;--		L-.
	.——	—
----	- J_	--- ----

This unit provides the following three different equalization curves. ROCK: Powerful sound emphasizing treble and bass

POP: More presence in the vocals and midrange

CLASSIC: Enriched sound with heavy bass and fine treble

Press the GEQ button repeatedly until the desired equalization curve is displayed.

bROCK+ POP+ CLASSIC+ EQOFFJ

I(cancel)

SOUND ADJUSTMENT DURING

RECORDING

The output volume and tone (except BBE) of the speakers or headphones may be freely varied without affecting the level of the recording,

Recording with BBE

The desired source can be recorded with the BBE function to enhance the clarity of high-frequency sound. When playing back a tape recorded with BBE, it is recommended that BBE be set to off

Using the headphones

Connect headphones to the PHONES jack with a stereo standard plug (06.3 mm, ‘/4 inch).

No sound is output from the speakers while the headphones are plugged in.

●When the headphones are plugged in, the SURROUND system and the DOLBY PRO LOGIC are canceled.

DSP SURROUND SYSTEM

J.. _	1- ._	—. —--
	_	— ——.—-

The DSP (Digital Signal Processor) surround circuits can recreate the effect of sounds reflected from walls or ceilings, to obtain the sound presence of real environments.

There are three modes with matching graphic equalization curves.

Press the SURROUND button repeatedly until the desired SURROUND mode is displayed.

%ISCO+LIV; +HALL+ S-OFFJ (cancel)

Equalization curves are selected automatically to match the SURROUND modes and can also be selected or turned off to suit your preference.

When the music source is monaural

Select LIVE to obtain a simulated stereo effect. When DISCO or HALL is selected, no sound will be heard from the surround speakers.

To cancel the selected mode

Press the selected button again. S-OFF is displayed.

While SURROUND mode is off, no sound is heard from the surround speakers.

To adjust the volume of the surround speakers

Press the MANUAL SELECT button once on the remote control. “S is displayed for 2 seconds. Press the +< DOWN or UP

➤P button on the remote control within these 2 seconds.

●The Dolby Pro Logic surround speakers level is also changed. (See page 17.)

●When a connected microphone is used, the SURROUND system is automatically canceled.

●When the DOLBY PRO LOGIC is turned on, the SURROUND system is automatically canceled.

7 ENGLISH