Aiwa NSX-AV800 Setting Up, Positioning The Speakers, Connections, Connect the front speakers

SETTING UP

The Dolby Pro Logic system which is the biggest feature of this stereo system provides you with audio visual entertainment in your home.

Complete setting and connection of the main unit, supplied speakers, your TV and video equipment according to the following procedure.

POSITIONING THE SPEAKERS

To achieve the optimum effects obtainable with the Dolby Pro Logic system, it is important to position the speakers properly. Refer to the following illustration to find out the best location in your room.

I

1

@) Front speakers

@Center speaker

Position in the center of the two front speakers. In addition,

position on or below the TV set, if connecting a TV set to the unit.

~Surround speakers

Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally, about 1 meter (3.2 feet) above ear height.

CONNECTIONS

Before connecting the AC cord

The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local voltage.

IMPORTANT

●Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord in the end.

●The front speaker marked R on the rear is the right speaker, and the marked L is the left speaker.

●There are no difference between the surround speakers. Both speakers can be connected as L (left) or R (right).

1Connect the supplied antennas.

Connect the FM antenna to the FM 75 Q terminals and the AM antenna to the AM LOOP terminals.

2 Connect the front speakers.

Connect the speaker with R mark to SPEAKERS R terminals, and the speaker with L mark to SPEAKERS L terminals.

s No sound is heard from the center and surround speakers when the Dolby Pro Logic and DSP are set to off.

●The center speaker sounds only when the Dolby Pro Logic is set to on.

The cords with white stripes should be connected to the 0 terminals and the other cords to the O ?erminals.

3 Connect the surround speakers.

There is no difference between the surround speakers. Both speakers can be connected as R (right) or L (left).

Connect the surround speaker cords to the SURROUND SPEAKERS d terminals.

3 ENGLISH