Aiwa NSX-AV800 Random Play, Repeat Play, Programmed Play, Example, Replacing discs during play

Replacing discs during play

While one disc is playing, the other discs can be replaced without interrupting play.

1Press the DISC CHANGE button.

2Remove the discs and replace with other discs.

3Press the = OPEN/CLOSE button to close the disc compartment.

●When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray.

●Do not place more than one compact disc on one disc tray.

●Do not tilt the unit with discs loaded. Doing so may cause malfunctions,

2 Press one of the DISC DIRECT PLAY buttons to select a disc.

The selected disc is indicated in red on the display. Go to the next step when the tray stops rotating.

3 Press the numeric buttons and the +10 button to program a track.

Example:

To select the 25th track, press the +1O, +1O and 5 buttons. To select the 10th track, press the +10 and O buttons.

Program number	Total playing	time of
	the selected	tracks

RANDOM PLAY

All the tracks on the selected disc or on all the discs can be played randomly,

Press the RANDOM button on the remote control.

RANDOM lights up on the display.

To cancel random play, press again.

●Even if the +< button is pressed, a previously played track cannot be skipped. The unit returns to the beginning of the current track only.

●Direct selection of the tracks with the numeric buttons is not possible,

REPEAT PLAY

A single disc or all the discs can be played repeatedly.

Press the REPEAT button on the remote control.

Clights up on the display.

To cancel repeat play, press again.

PROGRAMMED PLAY

Up to 30 tracks can be programmed from any of the inserted

1

2

3

544

■

Use the remote control.

1 Press the PRGM button twice in stop mode.

The PRGM indicator flashes on the display.

●When the PRGM button is pressed once in step 1, the unit enters the KARAOKE PROGRAM (page 20).

Selected track number	Total number of
	selected tracks

4 Repeat steps 2 and 3 to program other tracks.

5 Press the +> button to start play.

To check the program

Each time the +< or ➤> button is pressed in stop mode, a disc number, track number, and program number will be displayed.

To clear the program

Press the ■ CLEAR button in stop mode.
To add tracks to the program
Before playing, repeat steps 2 and 3. The track will be	❑
programmed after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again
During the programmed play, the CD EDIT/CHECK, DISC
CHANGE, RANDOM, DISC DIRECT PLAY and numeric buttons
do not function.

ENGLISH 12