Alamo GR60, GR72 10.1 Starting the Tractor, 10.2 Brake and Differential Lock Setting

OPERATION

GR60/72 02/07 Operation Section 4-24

OPERATION

10.1 Starting the Tractor

The procedure to start the tractor is model specific.

Refer to the tractor operator’s manual for starting

procedures for your particular tractor. Consult an

authorized dealer if the starting procedure is

unclear. Ensure the 3-point control lever is in the

lowered position and the PTO is disengaged before

starting the tractor. OPS-U-0033

Make sure the tractor brakes are in good operating

condition. Tractor brakes can be set to operate

independently allowing single rear wheel braking

action or locked together to provide simultaneous

rear wheel braking. FOR MOST DRIVING AND

OPERATING CONDITIONS, THE BRAKE PEDALS

SHOULD BE LOCKED TOGETHER TO PROVIDE

THE MOST EFFECTIVE BRAKING ACTION.

Always disengage the tractor differential lock when

turning. When engaged the differential lock will

prevent or limit the tractor from turning. During

normal cutting conditions, locking the differential

provides no benefit and should not be used. OPS-U- 0013

Be aware of the operating co nditions. Do no t operate the Tractor with weak or faulty brakes.

When operating down a hill or on wet or rain slick roads, the braking dist ance increases; use

extreme care a nd reduce your speed in thes e conditions. When operatin g in traff ic, always

use the T r actor’s flash ing warning light s and red uce your speed. Be aware of traf fic aroun d you and watch ou

for the other guy.