TO THE OWNER/OPERATOR/DEALER
In addition to the standard Limited Warranty shown on the facing page, Servis-Rhino also provides:
1.) ONE-YEAR (12 months) {or 6 month for Commercial/Industrial Users} LIMITED WARRANTY on the
DRIVELINE components provided they have bee n properly maintained† and have not been subjected to
abuse or mis-use.
2.) FIVE-YEAR (60 months) LIMITED W ARRANTY* on GEARBOX component s provided they have been properly
maintained† and have not been subjected to abuse or mis-use except as limited below.
* WARRANTY LIMITATIONS - GEARBOX
A) W a rranty is ONE-YEAR (12 MONTHS) for Seals (Af t er one year, seals are considered to be WEARING
PARTS and replacement is the users' responsibility.)
B) Users' Gearbo xes may be rebuilt by Servis-Rhino or replaced by new or rebuilt Gearboxes at the option
of Servis-Rhino.
† NOTE - "properly maintained" specifically includes, but is not limited to:
A) Running Gearboxes with the proper amount of the correct lubricant.
B) Adjusting Slip Clutches correctly to provide proper protection for Driveline and Gearbox Components.
To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and
the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find
the informati on you need.
The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety
requirements of tractor operators:
REQUIRED OF THE OWNER:
1. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and
2. Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and
3. Ensure that each employee uses such Seatbelt while the tractor is moving; and
4. Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected
area provided by the ROPS.
REQUIRED OF THE OPERATOR:
1. Securely fasten seatbelt if the tractor has a ROPS.
2. Where possible, avoid operating the tractor near ditches, embankments, and holes.
3. Reduce speed when turning, crossing slop es, and on rough, slick, or muddy surfaces.
4. Stay off slopes too steep for safe operation.
5. Watch where you are going - especially at row ends, on roads, and around trees.
6. Do not permit othe rs to ri de .
7. Operate the tra ct or smo ot hly - no jerky turns, starts, or stop s.
8. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer.
9. When the tractor is stopped, set brakes securely and use park lock, if available.