Alamo GR60, GR72 manual Driveline Lubrication

MAINTENANCE

MAINTENANCE

Driveline Lubrication

Grease Fittings are located on the Cross Assembly of each U-Joint and on the Round Housing. Grease the U- Joint after each 8 hours of use. Do not force grease through the Needle Cup Assemblies. Grease the Round Housing after every 8 hours of use, except in sandy soil conditions. Some PTO-to-Hitch connections may necessitate cutting a hole in the shields to be able to align the Grease Fitting holes for lubrication.

(Mnt-0015 and Mnt-0016).

GR60/72 02/07 Maintenance Section 5-4

© 2007 Alamo Group Inc.