OPERATION
•Inspect blades and blade bolts for looseness and excessive wear. Make sure the mower is securely blocked up before crawling beneath.
Replace damaged, worn and missing blades as complete sets to maintain rotary balance during operation.
•Ensure carrier hub nut is tightened with the cotter pin inserted and spread.
Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN, WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY
FROM THROWN BLADES. (SGM-10)
9.3 Cutting Component Inspection
Inspect blade pan and blade assembly for the following:
GR60/72 02/07 | Operation Section |
© 2007 Alamo Group Inc.
