Operation

•Lift Type-Ensure the tailwheel beam position support bolts are properly installed and tightened.

•Pull Type-Ensure that the tailwheel ratchet or hydraulic cylinder is installed and retained correctly to provide the desired cutting height.

•Inspect all bolts and screws and tighten to the recommended torque. OPS-R-0039_C

•Ensure the tractor PTO master shield and the mower slip clutch shield are in place, lowered, and in good condition.

•Ensure the driveline integral shield is in good condition and rotates freely.

•Ensure the driveline slip clutch (if equipped) is properly adjusted. OPS-R-0039

•Inspect the gearbox oil level. A low oil level is a warning sign that the gearbox may be cracked or its seal is damaged and needs replacement.

•Ensure the gearbox vent is in place and free from clogs. OPS-R-0040

TW84 03/07

Operation Section 4-21

Alamo TW84 manual Operation