Alamo TW84 manual Hydraulic or Manual Lift, Wheels

ASSEMBLY

HYDRAULIC OR MANUAL LIFT

Attach the Spring Assembly (Asm-0038)to the lug on the mower deck behind the Center Gearbox. Retain using 3/4 x 3 capscrews and locknuts. Install the Hydraulic Cylinder or the manual Ratchet Lift Screw ( Asm- 0039) between the Axle Center Lug and the Lug directly behind the Center Gearbox. Tighten the two Bolts securely.

WHEELS

Install the Wheels on the Wheel Hubs. Note: If Laminated Tires are used, place the flat side of the Lug Nut against the Wheel Asm-R-0127.Note direction of travel and curvature of rubber segments in tire and install as shown in Asm-R-0127.

TW84 03/07 Assembly Section 3-7

© 2007 Alamo Group Inc.

ASSEMBLY