Alamo TW84 manual Operation

OPERATION

1.Standard Equipment and Specifications

	TW84
Horsepower Required	30 HP Min. (Pull)
	60 HP (Lift)
Cutting Capacity (Max.)	2”
Cutting Height	2-1/4” Min.
Safety Deflector	Std.
Cutting Width	84”
Overall Length	125” (Lift, Semi-Mount)
	152-1/2” (Pull)
Weight (Approx.)	1215 lbs
Hitch	CAT II or II-III Q.H. (Lift)
	Clevis (Pull)
Blade Carrier	Pan
Blade Tip Speed (FPM)	14,369 (540 RPM)
	15,062 (1000 RPM)
Gearbox Rating	110 HP*
Output Shaft Diameter	2”
Driveline Size	Cat 4
Deck Thickness	10 Ga.
Side Skirt	1/4” x 10-3/4”
Transport Width	90-3/8”
Jack Stand	Std. (pull)
Overall Width	90-3/8”
Replaceable Skid Shoes	Std.

*Ratings based on actual field performance.

The Mower is designed for certain mowing applications and is rated to cut up to a specific size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-vegetative material. Only

operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component damage and equipment failure resulting in possible serious injury or death. (SGM-14)

TW84 03/07 Operation Section 4-3

© 2007 Alamo Group Inc.

OPERATION