ASSEMBLY
ASSEMBLY
SINGLE TAIL WHEEL ASSEMBLY - LIFT TYPE
Insert bushing (2) in lug centered behind gearbox. Attach the tailwheel beam (1) to the lug on the mower deck using bolt (3) and locknut (4).
Attach the brackets (5 & 6) to the main deck using bolts (8), washer (9), & nuts (10). Note: Formed leg with adjustment holes must point to rear and should be on each side of tail wheel beam.
Install bolts 11) & nuts (12) on top and bottom of tailwheel beam. Insert through pair of holes which will give approximate desired cutting height. Tighten all bolts per Torque Chart.
TW84 03/07 | Assembly Section |
© 2007 Alamo Group Inc.
