Albatron Technology DM-5952KF Following lists the function keys on the remote control, Vol＋∕－

9. Using the Remote Control

Using remote control instead of the control panel is convenient to operate the monitor. Some of the keys must to work by connect with MATE, and these are DISP, SLEEP, MTS, JUMP, ADD ∕ERASE, AUTO, TV, VIDEO, S-VHS,

COMPONENT, TV∕PC∕AV, TV∕CATA, PIC-STD, PIC∕PAGE, PIC-SEL,

SYSTEM, FINE TUNING, CH-LOCK, FIELD, LANG, CAP∕TXT, CCD.

Note:

The mute function will automatically unlock if any adjusts are made related to audio (i.e., volume, bass, etc.)

Following lists the function keys on the remote control:

POWER Starts or stops the monitor function.

POWER ON∕OFF To Start or stop the multiple monitors function in the meanwhile. In general, this function is used well with multiple monitors’ control.

DISP Display the current mode on the present status.

SLEEP To set the sleep timer, each press will increase the sleep timer in 10-minute intervals up to 120 minutes (then back to 00). When the sleep count reaches the last 5 minutes, the screen will show up every minute for 3 seconds. During the last minute, and it will display every 10 seconds.

REMOTE CONTROL

MTS

MUTE

JUMP

ADD∕ERASE AUTO

MENU

MIC∕SEL＋ MIC∕SEL－

VOL＋∕－

Multi-Sound selection.

Cuts audio and turns audio back on.

Returns to the previous channel.

Allows the user to Add∕Erase channels manually.

Automatically scan all the channels by signal responds, and to set them on the preset mode.

Enable/Disables the On-Screen Display Menu.

This is a dual function key:

a. Press SEL ＋∕－ to serve as menu item selection. b. MIC for R mode.

This is a dual function key:

a. Press VOL ＋ ∕ － to control volume in any mode.

（optional）

14

b. Press VOL＋∕－ to control the selection function while in menu mode.

15