Alcatel Carrier Internetworking Solutions 8008 2-46

Console Interface

2-46

802.1Q VLAN Static Table Configuration

Use this screen to create a new VLAN or modify the settings for an existing VLAN.

You can add/delete port members for a VLAN, or prevent a port from being

automatically added to a VLAN via the GVRP protocol. (Also, note t hat all ports can

only belong to one untagged VLAN. This is set to VLAN 1 by default, but can be

changed via the 802.1Q VLAN Port Configuration screen on page 2-48.)

Note: No VLANs are statically configured by default.

Alcatel OmniStack 8008

< 802.1Q VLAN Static Table Configuration >

VID VLAN Name Status

------------------------------

1 Active

Egress Ports Forbidden Egress Ports

11111111 00000000

Untagged Ports

11111111 VID : 1

[Show]

[More]

[New]

<APPLY> <OK> <CANCEL>

Use <TAB> or arrow keys to move, other keys to make changes.

Parameter Description

VID The ID for the VLAN currently displayed.

Range: 1-2048

VLAN Name A user-specified symbolic name for this VLAN.

String length: Up to 8 alphanumeric characters

Status Sets the current editing status for this VLAN as:

Not in Service, Destroy, or Active.

Egress Ports Set the entry for any port in this field to “1” to add it to the displayed VLAN, or

“0” to remove it from the VLAN.

Forbidden Egress Ports Prevents a port from being automatically added to this VLAN via GVRP.

Untagged Ports Set the entry for any port in this field to “1” to add it to the displayed VLAN as

an untagged port.

[Show] Displays settings for the specified VLAN.

[More] Displays consecutively numbered VLANs.

[New] Sets up the screen f or configuring a new VLAN.

Contents

Main Page Page Page Contents Page Page Page 1-1 Chapter 1: Switch Management Configuration Options Required Connections Console Port (Out-of-Band) Connections Page 2-1 Chapter 2: Console Interface Log-in Screen 2-2 Main Menu The Main Menu is the first screen seen after successfully logging into the system. Main Menu 2-3 Page System and Switch Information 2-6 Displaying System Information System and Switch Information 2-7 Displaying Switch Version 2-8 Management Setup Menu 2-9 Changing the Network Configuration 2-10 IP Configuration 2-11 IP Connectivity Test (Ping) Page 2-13 Configuring the Serial Port 2-14 Assigning SNMP Parameters 2-15 2-16 2-17 Console Login Configuration 2-18 Downloading System Software 2-19 Saving the System Configuration Page 2-21 Configuring the Banner Message 2-22 Configuring the Switch 2-23 2-24 Configuring Port Parameters 2-25 Viewing the Current Port Configuration Page 2-27 The following figure and table describe Bridge STA configuration. 2-28 The following figure and table describe STA configuration for ports. 2-29 Page 2-31 2-32 The parameters shown in the following figure and table are for port STA Information. 2-33 Using a Mirror Port for Analysis 2-34 Configuring Port Trunks 2-35 Page 2-37 2-38 Configuring Broadcast Storm Control 2-39 Port Security Configuration 2-40 Configuring Bridge MIB Extensions 2-41 Configuring Traffic Classes 2-42 2-43 2-44 Configuring Virtual LANs 2-45 2-46 2-47 2-48 Use this screen to configure port-specific settings for IEEE 802.1Q VLAN features. 2-49 Monitoring the Switch 2-50 Displaying Port Statistics 2-51 Displaying RMON Statistics 2-52 2-53 Displaying the Unicast Address Table 2-54 Displaying the IP Multicast Registration Table 2-55 Configuring Static Unicast Addresses 2-56 Resetting the System Logging Off the System 3-1 Chapter 3: Web Interface Web-Based Configuration and Monitoring 3-2 Navigating the Web Browser Interface Home Page Page 3-4 Panel Display Port State Display Panel Display 3-5 Configuring the Serial Port 3-6 Main Menu System Information 3-7 System Information Switch Information IP Configuration 3-9 IP Configuration 3-10 SNMP Configuration SNMP Community Security Configuration 3-11 Trap Managers Security Configuration Change Password 3-12 Firmware Upgrade Options Web Upload Management Page 3-14 Configuration Save and Restore Configuration Upload Management Configuration Download Management Address Table Configuration 3-15 Address Table Configuration 3-16 STA (Spanning Tree Algorithm) Spanning Tree Information STA (Spanning Tree Algorithm) 3-17 The parameters shown in the following figure and table are for port STA Information (Port 1~8). Page STA (Spanning Tree Algorithm) 3-19 3-20 STA Port Configuration The following figure and table describe STA configuration for ports. Configuring Bridge MIB Extensions 3-21 Configuring Bridge MIB Extensions Bridge Capability Page Priority 3-23 Priority Port Priority Configuration Page 3-25 Configuring Virtual LANs VLAN Basic Information 3-26 VLAN Current Table 3-27 VLAN Static List VLAN Static Table Page Page 3-30 VLAN Port Configuration Use this screen to configure port-specific settings for IEEE 802.1Q VLAN features. IGMP Multicast Filtering 3-31 IGMP Multicast Filtering Configuring IGMP Page Port Menus 3-34 Port Configuration Use the Port Configuration menus to configure any port on the switch. Port Menus 3-35 Port Broadcast Storm Protect Configuration Page Using a Port Mirror for Analysis 3-37 Using a Port Mirror for Analysis Port Trunk Configuration Page Port Statistics 3-39 Port Statistics Etherlike Statistics 3-40 RMON Statistics Port Statistics 3-41 Page 4-1 Chapter 4: Advanced Topics Layer 2 Switching Spanning Tree Algorithm Advanced Topics 4-2 Virtual LANs Virtual LANs 4-3 Assigning Ports to VLANs Automatic VLAN Registration (GVRP) Page Multicast Filtering 4-5 Multicast Filtering IGMP Snooping IGMP Protocol Advanced Topics 4-6 Class-of-Service (CoS) Support Port Trunks SNMP Management Software Remote Monitoring 4-7 Remote Monitoring Page A-1 Appendix A: Troubleshooting Troubleshooting Chart Troubleshooting A-2 Upgrading Firmware via the Serial Port Page Page B-1 Appendix B: Pin Assignments Console Port to 9-Pin COM Port on PC Console Port Pin Assignments DB-9 Port Pin Assignments Pin Assignments B-2 Console Port to 25-Pin DTE Port on PC Glossary Page Page Page Index Index-1 Numerics A B Index Index-2 O P Q Page www.alcatel.co www.alcatel.com/enterprise