System Information

3-7

System Information

Use the System Information screen to display descriptive information about the

switch, or for quick system identification as shown in the following figure and table.

Parameter Description
System Name1Name assigned to the switch system.
IP Address2IP address of the switch you are managing. The switch’s management
supports SNMP over UDP/IP transport protocol. In this environment, all
systems on the Internet, such as network interconnection devices and any PC
accessing the switch must have an IP address. Valid IP address es consist of
four decimal numbers, of 0 to 255, separated by periods. Anything outside of
this format will not be accepted by the configuration program.
Object ID MIB II object identifier for switch’s network management subsystem.
Location1Specifies the area or location where the system resides.
Contact1Contact person for the system.
System Up Time Length of time the current management software has been running.
1 Maximum string length is 255, but the screen only displays 45 characters. You can use th e arrow keys to
browse the whole string.
2 The default value is 192.168.10.1