XOver Delay: This delay has a stereo effect. The echo pans around the stereo field.
LDly / RDly (left/right delay): The speed of the delay/echo. This can be set differently for the left and right channels to create an even wider, more varied sound.
Feedback: How much of the echo will be routed back into the processor again, which creates a
Damp (damping): The amount of low- and
Level: The volume level of the delayed signal.
PingPong: This delay has a stereo effect, but instead of echoing in both lft and right channels simultaneously, the echo alternates between them.
Delay: The speed of the delay/echo.
Feedback: How much of the echo will be routed back into the processor again, which creates a
Damp (damping): The amount of low- and
Level: The volume level of the delayed signal.
c.COMP (compression)
Type: The kind of compression applied. To disable the dynamic processor on the Kit, select "OFF."
Compress (compression): The compression ratio applied to the signal from the Kit.
Out Level (output level): The output level of the compressor. This is parameter is useful for boosting the Kit's signal if its volume has decreased due to the compression.
d.EQ (equalization)
LF Gain
LF Freq (low frequency): The frequency the LF Gain will boost or cut.
HF Gain
HF Freq (high frequency): The frequency the HF Gain will boost or cut.
15
