TRIG (F3)
Pressing TRIG (F3) from the Main Utility menu lets you access a page that contains the various trigger settings for the module.
TRIG
1.Press UTILITY to enter the main Utility Menu.
2.Press TRIG (F3) to access the trigger settings.
3.Use VALUE UP / DOWN or the VALUE DIAL to adjust the settings:
a.Trig Sens: The sensitivity of all the connected triggers – "LOW," "MEDIUM," or "HIGH." Adjusting this setting lets you roughly set the sensitivity of the entire Kit but conveniently keeps the proportions of your individual trigger settings. (To adjust the sensitivity of individual triggers, see the TRIGGER INPUT PARAMETERS section of the EXT. TRIG MENU chapter.)
b.HiHat * : Select "NOTE+CC#4" or "NOTE ONLY." This determines whether the
c.HH Splash * : Select "SENT" or "NOT SENT." This determines whether the
d.Cym Choke * : Select "SENT" or "NOT SENT." This determines whether the cymbal "choke" note (generated by grabbing the cymbal and touching the choke strip) will be sent or not.
*Note: The "HiHat," "HH Splash," and "Cym Choke" parameters allow you to tailor the MIDI output of these notes, which is useful when using the module with an external hardware or software drum module that does not support a variable
Also, even when these parameters are set to "NOTE ONLY" or "NOT SENT," the MIDI notes and information you have "disabled" will actually still be recorded when you record a Sequence, but they will not be sent to the MIDI output.
SYS (F4)
Pressing SYS (F4) from the Main Utility menu lets you access a page that contains the module's various system settings.
SYSX (F1)
This page lets you send out the module's settings as a SysEx (.syx) file to be recalled later.
1.Press UTILITY to enter the main Utility Menu.1).
2.Use CURSOR UP / DOWN to move through the menu items:
a.All Memory: All of the module's memory that can be saved will be saved as a SysEx file. This includesyour trigger settings, Kits, and Sequences.
b.All Trigger Settings: Only the module's trigger settings will be saved as a SysEx file.
3.Press SEND (F4) to send the selected settings from the module as a SysEx file.
INIT (F2)
This page lets you reinitialize different settings in the module, restoring them to their factory defaults.
1.Press UTILITY to enter the main Utility Menu.
2.Press SYS (F4) to access the Accompaniment settings.
3.Press INIT (F2) to access the reinitialization page.
4.Use CURSOR UP / DOWN to move through the menu items:
a.All Kits: All of the module's Kits and their settings will return to their factory defaults.
b.All Sequences: All of the module's Sequences and their settings will return to their factory defaults.
c.All Trigger Settings: All of the module's trigger settings will return to their factory defaults.
5.Press EXEC (F4).
6.A window will appear asking you to confirm your choice. To confirm and reinitialize the selected settings, press YES (F1). To cancel, press CANCEL (F2 or F3).
31
