20 | Replacing the Coin-Cell Battery
Replacing the Coin-Cell Battery WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1Place the coin-cell battery into the slot and press gently to adhere it to the computer
base.
2Route the coin-cell battery cable through the routing guides on the computer base.
3Connect the coin-cell battery cable to the connector on the system board.
Postrequisites
1Replace the base cover. See "Replacing the Base Cover" on page 15.
2Replace the battery pack. See "Replacing the Battery Pack" on page 13.
3Follow the instructions in "After Working Inside Your Computer" on page 11.
10
Book.book Page 20 Thursday, June 7, 2012 3:01 PM