23

Removing the Display

Assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

1Remove the battery pack. See "Removing the Battery Pack" on page 12.

2Remove the base cover. See "Removing the Base Cover" on page 14.

3Remove the center control cover. See "Removing the Center Control Cover" on page 26.

4Remove the keyboard. See "Removing the Keyboard" on page 32.

5Remove the macro keyboard. See "Removing the Macro Keyboard" on page 36.

Procedure

1Disconnect and peel off the video-card connector cable from the connectors on the system board.

1

1 video-card connector cable

Removing the Display Assembly

43

Page 41
Image 41
Alienware M18X R2 owner manual Removing the Display, Assembly