1219 mm | Alliance Laundry Systems CHM1772C specification

Installation

Mounting Bolt Hole Locations (Without Elevated Base Frames)

	0.75 in.		0.75 in.
	(19 mm)		(19 mm)
	46.5 in.
	(1181 mm)
			10 in.
			(254 mm)
48 in.	(1219mm)
	61.5 in.		15 in.
	(1562 mm)		15 in.
	(1562 mm)		(381 mm)
			(381 mm)
	55.47 in.
	(1409 mm)
	48.94 in.		15.25 in.
	(1243 mm)		(388 mm)
	23.25 in.	23.25 in.
	(591 mm)	(591 mm)
		Front of Front Panel	0.75 in.
	48 in.		(19 mm)
	48 in.
	(1219 mm)
	125 Models
			CHM2069N

Figure 18

IMPORTANT: Drawing is not to scale.

F8208301

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

35

Image 37

Alliance Laundry Systems CHM1772C manual 1219 mm

Contents

Washer-Extractors Page Contents Important Safety Instructions Explanation of Safety Messages Safety Information Safety Decals Do not bypass any safety devices in the machine Operator Safety Model Model Identification Introduction 125 Pound Nameplate Location Delivery Inspection Introduction Model Number Familiarization Guide CN040GC2OUID01 Customer Service Replacement Parts Wash Cylinder Information Speed Models Specification Weight and Shipping Information Estimated Building Heat Load Power ConsumptionDrive Train Information Cylinder Speeds Electrical Heating Optional Number of motors in drive train Drive motor power, hp kW Electrical Heating Specifications and Dimensions Specifications and Dimensions Machine Capacity Dimensions 92 in 252 mm 94 in 202 mm Machine Capacity Dimensional Clearances Dimensions 125 Dimensional Clearances Minimum Depth Methods Requirement Machine FoundationMinimum Floor Load Data, Variable-Speed Models Specification 125 Floor Load Data, 2 Speed Models Specification 20, 30, 40 and 60 Models Concrete Foundation Installation Installation Models Anchor Specifications Refer to Figure Direct-to-Finished-Floor InstallationMachine Anchoring Ft.- lbs Completed expansion bolt installation is shown in Figure Elevated Base Frame Installation P035I Models Mounting Bolt Hole Locations Without Elevated Base Frames Front of Frame 19 mm 45 mm 660 mm 32 mm 41.5 1054 mm 1219 mm Mounting Bolt Hole Locations With Elevated Base Frames CHM2072N 92 mm 56 mm Drain Trough Drain Connection Drain Line Sizing Minimum Drain ID Model Number of Machines Drain Information 125 Cabinet Hardmount Water Supply Information Water Connection RequirementsNumber Supply Line Size Machines Hot/Cold Electrical Installation Requirements Input Power Condition Corrective Action Input Power Conditioning Input Voltage Requirements Connection SpecificationsCircuit Breakers and Quick Disconnects Grounding Thermal Overload Protector Phase Adder Standard Electric Heat Installation Electrical Specifications Pound Capacity Models 380 440 200 208 Variable-Speed Models 380-415 440-480 200 208-240 10.0 380 50/60 10.0 Supply Dispensing Steam Requirements Steam Heat Option OnlySteam Supply Information Supply Dispensing External Supplies 20 80 Pound OPL Models Connection of External Liquid Supplies Basket Rotation Start Up