Electrical Heating Optional | Alliance Laundry Systems CHM1772C

Specifications and Dimensions

2 Speed Models (Continued)

Specification			20	30	40	60

Direct Steam Heating (Optional)

Steam inlet connection size, NPT			N/A	N/A	1/2	1/2

Number of steam inlets			N/A	N/A	1	1

Steam required to raise bath	LOW		N/A	N/A	2.09	3.6
water temperature,	LOW		N/A	N/A	(0.84)	(0.895)
water temperature,					(0.84)	(0.895)
10°F (10°C), lbs. (kg)
10°F (10°C), lbs. (kg)	MED		N/A	N/A	2.40	4.4
				N/A	2.40	4.4
					(1.15)	(1.384)
					(1.15)	(1.384)

	HIGH		N/A	N/A	2.84	5.5
	HIGH		N/A		(1.48)	(1.916)
					(1.48)	(1.916)

Average steam use per cycle,			N/A	0.73	1.43	2.32
bhp (kg)			N/A	(6.9)	(12.2)	(15.4)
bhp (kg)				(6.9)	(12.2)	(15.4)

Electrical Heating (Optional)

Total electrical heating	Input Voltage
capacity, kW
capacity, kW	200V		5.4	5.4	10.8	10.8
	200V		5.4	5.4	10.8	10.8

	240V		7.8	7.8	15.6	15.6

	380V		6.5	6.5	13.0	13.0

	415V		7.8	7.8	15.5	15.5

	480V		10.4	10.4	15.6	15.6

Electrical heating elements			3	3	6	6

Electrical heat element size, kW			2.6	2.6	2.6	2.6

14

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F8208301

Image 16

Alliance Laundry Systems CHM1772C manual Electrical Heating Optional

Contents

Washer-Extractors Page Contents Explanation of Safety Messages Important Safety Instructions Safety Information Safety Decals Operator Safety Do not bypass any safety devices in the machine Model Identification Model Introduction Pound 125 Delivery Inspection Nameplate Location CN040GC2OUID01 Introduction Model Number Familiarization Guide Replacement Parts Customer Service Speed Models Specification Weight and Shipping Information Wash Cylinder Information Power Consumption Estimated Building Heat LoadDrive Train Information Cylinder Speeds Electrical Heating Optional Number of motors in drive train Drive motor power, hp kW Electrical Heating Specifications and Dimensions Specifications and Dimensions Machine Capacity Dimensions 92 in 252 mm 94 in 202 mm Dimensional Clearances Machine Capacity Dimensional Clearances Dimensions 125 Minimum Depth Methods Requirement Machine FoundationMinimum Floor Load Data, 2 Speed Models Specification Floor Load Data, Variable-Speed Models Specification 125 Concrete Foundation Installation 20, 30, 40 and 60 Models Installation Models Direct-to-Finished-Floor Installation Anchor Specifications Refer to FigureMachine Anchoring Ft.- lbs Elevated Base Frame Installation Completed expansion bolt installation is shown in Figure P035I Mounting Bolt Hole Locations Without Elevated Base Frames Models Front of Frame 19 mm 45 mm 660 mm 32 mm 41.5 1054 mm 1219 mm Mounting Bolt Hole Locations With Elevated Base Frames CHM2072N 92 mm 56 mm Drain Connection Drain Trough Drain Information 125 Drain Line Sizing Minimum Drain ID Model Number of Machines Water Connection Requirements Cabinet Hardmount Water Supply InformationNumber Supply Line Size Machines Hot/Cold Electrical Installation Requirements Input Power Conditioning Input Power Condition Corrective Action Connection Specifications Input Voltage RequirementsCircuit Breakers and Quick Disconnects Grounding Phase Adder Thermal Overload Protector Installation Electrical Specifications Pound Capacity Models Standard Electric Heat 380 440 200 208 Variable-Speed Models 380-415 440-480 200 208-240 10.0 380 50/60 10.0 Steam Requirements Steam Heat Option Only Supply DispensingSteam Supply Information Supply Dispensing External Supplies Connection of External Liquid Supplies 20 80 Pound OPL Models Start Up Basket Rotation