UW Models With M30 Control

1.When display shows a cycle number, the washer- extractor is ready to be loaded with laundry.

2.Press the STOP/UNLOCK button located on the control. Refer to Figure 14.

PHM758N

Figure 14

3.Open door within five seconds of pressing the door unlock keypad.

4.Turn the door handle clockwise and swing the door left to open it. The door must be opened within 5 seconds of pressing the door unlock button. Refer to Figure 15.

PHM593N

Figure 15

Basic Installation/Operation

5.Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled.

Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and out-of- balance situations.

PHM590N

Figure 16

F232156

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

31

Page 32 Page 34
Page 33
Image 33
Alliance Laundry Systems P232156R9 manual UW Models With M30 Control
Page 32 Page 34
Top Page Image Contents