Alliance Laundry Systems P232156R9 Crush hazard, UniLinc and M30 Control Models, 100 125 150

Basic Installation/Operation

UniLinc and M30 Control Models

Dimensional Clearances

Allow a minimum of 24 inches (60 cm) at the rear and 6 inches (45 cm) at the sides for maintenance, inspection, and adjustment. Allow at least 6 inches (45 cm) between machines in multiple installations. Machine dimensions are indicated in Table 6 and specified in Figure 1 and Figure 2.

NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice.

WARNING

Crush hazard.

To avoid personal injury and/or property damage, do not tip the UW150 machine more than 25 degrees in any direction.

W642

UniLinc and M30 Control Pocket Hardmount Machine Dimensions (Refer to Figure 1 and Figure 2)

Dimension		35		60		80		100		125		150
		in	mm	in	mm	in	mm	in	mm	in	mm	in	mm
A		30.125	765	35.625	905	41.125	1045	41.125	1045	48	1219	50.25	1277
B	1	33.375 (Models through 5/31/09)	848	36.625	930	41.5	1054	41.5	1054	48	1219	50.25	1277
		32.5 (Models starting 6/1/09)
C		23.75	603	28.25	718	29	737	29	737	29	737	32	813
		43.625 (Variable speed models	1108	45	1143	51.5	1308	54.5	1384	58	1473	63	1600
D		through 5/31/09)
		38.25 (2-speed models
		through 5/31/09)
		44 (All models starting 6/1/09)
E2		.5	13	1	25	3	76	3	76	1.5	38	2.9	73
F		55.5	1410	64.5	1638	68.5	1740	68.5	1740	72	1829	79	2007
G2		36	914	36	914	43.75	1111	43.75	1111	48	1219	56	1422
H		8	203	15.5	394	16.875	429	16.875	429	11.375	289	15.75	400
J		43.14	1096	49.8	1265	53.54	1360	53.54	1360	56.4	1433	62.85	1596
K		46.64	1185	53.3	1354	57.04	1449	57.04	1449	59.9	1521	66.35	1685
L		5.12	130	5.12	130.05	7.12	181	7.12	181	7.12	181	7.12	181
M		2.62	66	2.62	66	3.62	92	3.62	92	3.62	92	3.62	92
N		1.37	35	1.37	35	2.25	57	2.25	57	2.25	57	2.25	57
O		3.87	98	3.87	98	5	127	5	127	5	127	5	127
P		2.5	64	2.5	64	2.75	70	2.75	70	2.75	70	2.75	70
Q		2.5	64	2.5	64	3.5	89	3.5	89	3.5	89	3.5	89

1Overhang dimensions for the optional starch dispenser are as follows: 35, 3.88 inches (9.86 cm); 60, 1.75 inches (4.45 cm); 80 and 100, 0.33 inches (0.83 cm). (The starch dispenser does not overhang the 125.) (No longer available.)

2The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only) adds 24 inches (60.96 cm) to combined machine dimensions E and G.

Table 6

F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 17