Basic Installation/Operation
CAUTION
Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury.
SW025
NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage.
IMPORTANT: To prevent
7.When loading is complete, ensure that all fabric is inside the basket. Then close and lock the door. Add dry supplies are placed in the supply dispenser compartment cups prior to the start of each cycle. Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system.
NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washer- extractor.
8.Press 
and 
keypads to select desired wash cycle.
For Technical Service
Distributor ABC
As the cycle proceeds, the display will show a summary of the cycle occurring. Refer to Figure 8
To begin the cycle at any step other than the first step,
press the 
keypad to advance through the cycle to the desired starting point. (The Rapid Advance feature keypad is enabled at the factory and can be disabled.) Refer to Programming Manual for information to disable Rapid Advance.
If the door is not closed and locked, the display will indicate that the door needs to closed and locked. Refer to Figure 13.
PHM706N
Figure 13
Close door to start cycle or press 
keypad to return to Cycle Menu.
10.The cycle will continue until its completion. Then the display will show the door is ready to be unlocked and opened.
NOTE: The Drain Step that occurs before an Extract Step or a Spray Rinse Extract Step cannot be skipped using Rapid Advance. The machine MUST drain and balance during the Drain Step before it can extract.
Cycle41:
Supply Set
Up
Cycle Menu
Cycle01:
Towels
White
Bleach
Cycle02:
Towels White
PHM702N
Figure 12
9. Press 
to start the selected cycle.
30 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232156 |
