Nortel Networks Modular ICS 4.0 Not in service Parked call, Pick up receiver Priority, Block

Common feature displays / 205

Not in service

Parked call

CALLBACK

Pick up receiver

Priority> 221

BLOCK

Release a call

Use line pool?

YES NO

Hold or release

Release calls

The telephone to which you directed a call is not in service or is otherwise unavailable. The call is returned to your telephone.

No one answered the call you parked. The call has come back to you.

You have used the Call Queuing feature without picking up the receiver. Auto Handsfree has not been assigned to your telephone. You must use the receiver or

©to answer a call.

You are receiving a priority call. If you are on another call, inform the person you are speaking to that you are about to put the call on hold. Press the flashing line indicator of the priority call or wait until the call connects automatically (in eight seconds). The priority call goes through when you hear the next beep. Your active call is placed on Exclusive Hold. It is reconnected automatically when the priority call ends (unless you transfer the priority call, in which case you must press the line button of your original call to reconnect). Use DND ( ƒ°fi) or press BLOCK to reject a priority call.

You have no free line buttons on which to receive a call. Release one of your current calls and try again to answer the incoming call.

You have received a Ring Again offer for a line pool. Press the flashing internal line button or YES to use the line pool. On the M7100 telephone, just lift the receiver. Otherwise, press NO or wait 30 seconds for the Ring Again offer to expire.

You cannot program a feature button while you are on a call.

You have tried to use a feature while you were on a call or had calls on hold. Release the call or calls, before using the feature.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide