Nortel Networks Modular ICS 4.0 manual Adding or changing User Speed Dial, 019

68 / Time savers for making calls

Adding or changing User Speed Dial

ƒ•›

To add or change a User Speed Dial number on your telephone:

1.Press ƒ•›.

2.Enter a two-digit code from 71 to 94 that you want to associate with a telephone number.

3.To include a line selection for this number, press the line or intercom button. To select a line pool, press a programmed line pool button, or press Δand enter a line pool access code. For the M7100 telephone, you can select only a line pool.

4.Enter the number you want to program.

5.Press ˙or OK.

Displays

01:9___		Continue entering the number you want to
CANCL BKSP	OK	program. You can change the number by
		pressing BKSP or √. When you are
		finished, press ˙or OK.
		Enter the telephone number you want to
Enter digits
QUIT	OK	program exactly as if you were dialing it
		normally. When you are finished, press
		˙or OK.

Invalid code

No number stored

You have entered a code outside the code range (01-70 for system, 71-94 for personal).

There is no number stored on the speed dial code you have dialed.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01