Nortel Networks Modular ICS 4.0 manual Using Last Number Redial

		Time savers for making calls / 65
		You are programming an internal autodial
Invalid number
		button and have entered a number that is not
		an internal number on your system. Enter a
		valid internal number. If the number you are
		entering is a destination code, use external
		autodial.
		Press the memory button you want to
Press a button
QUIT		program.
		Enter the number you want to program onto
Program and HOLD
		the button, then press ˙.
		Enter the number you want to program onto
Program and OK
QUIT	OK	the button, then press ˙or OK. You
		may include a line or line pool selection in an
		autodial sequence by selecting the line
		before entering any digits.
		The number is stored on the button.
Programmed

For other displays, see “Common feature displays” on page 203.

Using Last Number Redial

ƒfi

Press ƒfito redial the last external number you dialed.

Last Number Redial records a maximum of 24 digits.

Tip - If you have a programmed Last Number Redial button, you can use Button Inquiry ( ƒ•‚), then press the Last Number Redial button followed by £) to check the last number before you dial it.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide