Nortel Networks Modular ICS 4.0 manual Using intercom as the line for Autodial, Quit

64 / Time savers for making calls

If you select a line before pressing the autodial button, the call goes out on the line you have selected instead of the line that is part of the autodialer programming.

For the M7100 telephone, an external autodialer can be programmed only by using a line and not a line pool.

Tip - If you do not include a line selection in an autodial number, the call uses your prime line (if you have one).

Using intercom as the line for Autodial

If you press Δas the line for an external autodial number, you must include a valid line pool access code or a destination code. If line pool access codes or destination codes are changed, remember to reprogram autodial numbers.

Displays

987___			Continue to enter digits until the number is
QUIT	BKSP	OK	complete. Press √or BKSP to
			erase an incorrect digit. Press ˙or
			OK when you are finished.

Autodial full

Button erased

The memory allotted to autodial numbers in your Norstar system is full.

While programming external Autodial, you erased the button by pressing ˙or OK before entering any digits.

Enter digits		Enter the number you want to program
QUIT	OK	(choosing the line first if necessary) exactly
		as if you were making a call.
		Enter the internal telephone number you
Intercom #: ___
QUIT		want to program.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01