Nortel Networks Modular ICS 4.0 manual Changing the direct-dial telephone assignments

Using System features / 175

You cannot forward calls to a direct-dial telephone that is outside your Norstar system. See “Making changes to Call Forward No Answer” on page 23.

Note: ISDN terminals cannot use the Direct-Dial digit to reach a Direct-Dial set.

Changing the direct-dial telephone assignments

Your installer or customer service representative sets up the direct-dial telephone.

You can change which direct-dial telephone a telephone is assigned to, or assign it no direct-dial telephone.

You need the programming template found at the front of this guide. See “Getting started with Norstar” on page 1 for more information.

1.Press ƒ••¤flfl‹››.

2.Press ¤‹fl›fl(the default System Coordinator password).

3.Press ≠at Terminals&Sets.

4.Enter the internal number of the telephone you want to program and press ≠. The display reads

Capabilities.

5.Press ≠.

6.Press ‘until the display reads D-Dial.

7.Press CHANGE to select Set1, Set2, Set3, Set4, Set5 or None.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide