Nortel Networks Modular ICS 4.0 Using Saved Number Redial, Ƒfl‡, Saving a number, Unknown number

Time savers for making calls / 69

Program and HOLD If you want to program a line or line pool selection for this speed dial number, select the line or line pool. Otherwise, enter the telephone number exactly as if you were dialing it normally. When you are finished, press ˙.

Program and OK		If you want to program a line or line pool
QUIT	OK	selection for this speed dial number, select
		the line or line pool. Otherwise, enter the
		telephone number you want to program
		exactly as if you were dialing it normally.
		When you are finished, press OK.
		There is no line associated with the speed
Select a line
		dial number you are trying to use. Select a
		free external line or line pool and enter the
		speed dial feature code again.
		The system cannot dial the number stored.
Unknown number
		Reprogram the number.

For other displays, see “Common feature displays” on page 203.

Using Saved Number Redial

ƒfl‡

You can save the number of the external call you are on (provided you dialed the call) so that you can call it again later. Each telephone can save one number at a time with Saved Number Redial, not one number for each line.

Tip - You can copy a number onto an autodial button using Saved Number Redial.

Saving a number

Press ƒfl‡while you are on the call.

Saved Number Redial records a maximum of 24 digits.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide