Nortel Networks Modular ICS 4.0 manual Ringing Serviceö

Using System features / 167

For example, there may be a version of Restriction service called Night Schedule that prevents anyone from making long distance calls. But calling it Night Schedule does not mean it can only be used with a schedule. You can turn the Night Schedule for Restriction Service on or off as needed any time of the day or night. If you decide to run a service on a schedule, the system uses the start and stop times used for that schedule.

An example of how to turn on a Service manually

You may have Ringing service (your night service) set up to run according to the Night Schedule. You may decide you want that ringing arrangement to come into effect only when it is turned on and off manually.

You need the programming template found at the front of this guide. See “Getting started with Norstar” on page 1 for more information.

1.Press ƒ••¤flfl‹››.

2.Press ¤‹fl›fl(the default System Coordinator password).

3.Press ‘twice.

4.Press ≠at Services. The display reads

Ringing Serviceö.

5.Press ≠. The display reads Sched:Nightö.

6.Press ≠and use CHANGE to set the Service to

Manual.

Night Schedule for Ringing Service no longer follows the schedule but can be turned on and off by using the feature code and selecting Night Ringing. See “Turning Services on and off using feature codes” on page 168.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide