Nortel Networks Modular ICS 4.0 Choosing a line using a line button, Line pools, Later, YES Exit

Making calls / 55

Not in service

On another call

LATER

Restricted call

You have entered the number of a telephone that is not in service.

The telephone you have called is on another call. Press LATER to use the Ring Again or Message features.

The call you are trying to make has been restricted in programming. A possible reason is time-of-day restrictions on certain calls.

Ring Again?			Press YES to use Ring Again. Press NO to
YES	NO	EXIT	send a message. See “Sending messages”
			on page 98 and “Turning on Ring Again” on
			page 61.
			Either you have no prime line, or the prime
Select a line
			line is in use, or the line programmed for an
			autodial number, speed dial number, or
			Hotline is in use. Select a line and dial again.
			Press YES to send a message. See
Send message?
YES	NO		Messages.

For other displays, see “Common feature displays” on page 203.

Choosing a line using a line button

You have one line button for each line assigned to your telephone. Press the line button to select the line you want to answer or use to make a call. Having several line buttons allows you immediate access to more than one line.

The M7100 telephone has two intercom paths which are used instead of line buttons to answer and make calls. Each M7100 can be assigned two lines. You can press ˙to switch between two calls, one active and one on hold.

Line pools

A line pool is a group of external lines that can be shared by many telephones. You can use a line in a line pool to make an external call.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide