Nortel Networks Modular ICS 4.0 manual HandsfreeNone, HandsfreeAuto, HandsfreeStd

48 / Answering calls

1.Press ƒ••¤flfl‹››.

2.Press ¤‹fl›fl(the default System Coordinator password).

3.Press ≠and enter the internal number of the telephone you want to program.

4.Press ≠twice.

5.Press ‘three times.

6.Choose a setting at Handsfree: using the CHANGE button.

There are three ways to set Handsfree for an individual telephone:

Handsfree:None

CHANGE

Handsfree:Auto

CHANGE

Handsfree:Std

CHANGE

Handsfree is not available to the telephone.

You can make or answer a call without having to pick up the receiver or press ©. The telephone’s internal

microphone and speaker turn on automatically when you press a line or intercom button to make or answer a call.

A standard version of Handsfree described “Using Handsfree/Mute” on page 45.

For other displays, see “Common feature displays” on page 203.

Both Auto and standard Handsfree allow you to use a headset with a Norstar telephone.

A Handsfree/Mute button is automatically assigned to a telephone that is programmed with Handsfree and is always located in the lower right-hand corner of the telephone.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01