Nortel Networks Modular ICS 4.0 manual Disconnecting one party

42 / Answering calls

3.Press the button where the first call is on hold to create a conference.

Only the person who established the conference can process the conference by using the procedures described in this section.

Tip - You can create a conference by releasing privacy on a call. See “Turning Privacy on or off for a call” on page 49.

Disconnecting one party

You can disconnect one party from a conference and continue talking to the other.

On an M7208, M7310 or M7324 telephone:

1.Press the line button of the call that you want to disconnect. The call that you want to keep is automatically put on hold.

2.Press ®. The call is disconnected.

3.Press the line button of the held call to speak to the remaining person.

On an M7100 telephone:

1.Press ƒ£‹, to place one caller on hold. Press ˙again, to put the caller you want to keep on

hold.

2.Press ®. The call is disconnected.

3.Press ˙to speak to the remaining party.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01