Nortel Networks Modular ICS 4.0 manual M7310 telephone button defaults, Dual memory buttons

Customizing your telephone / 121

Each telephone can have up to four answer buttons. They appear above Intercom buttons in the right column and continue up from the bottom in the left column, replacing the features on those buttons. (On the M7208 telephone, answer buttons appear above Intercom buttons and below external line buttons in a single column.)

External line buttons appear in ascending line order, starting at the top button in the left column (the top button on the M7208 telephone). If more than five external lines are assigned to an M7310 telephone, or more than 12 to an M7324 telephone, assignment continues down the buttons on the right column, erasing the features on those buttons. Line buttons have priority over feature access buttons but not Handsfree/Mute, Intercom, or answer buttons.

M7310 telephone button defaults

The default button assignments for the M7310 telephone depend on the template applied. The exception is the default numbering for the dual memory buttons. Refer to “Using Buttons” on page 4.

Dual memory buttons

Set∫	233	Set∫	237	Set∫	241
Set∫	221	Set∫	225	Set∫	229
Set∫	234	Set∫	238	Set∫	242
Set∫	222	Set∫	226	Set∫	230
Set∫	235	Set∫	239	Set∫	243
Set∫	223	Set∫	227	Set∫	231
Set∫	236	Set∫	240	Set∫	244
Set∫	224	Set∫	228	Set∫	232

This example shows defaults for a system with three-digit internal numbers. The defaults do not actually exist on any telephone, as no telephone has an autodial button for itself. The position that would be taken by the autodial button for itself, is blank.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide