Nortel Networks Modular ICS 4.0 manual Canceling Line Redirection

Forwarding your calls / 89

Tip - The line chosen for redirecting calls on other lines can be used normally when it is not busy on a redirected call. To avoid redirection failing because the chosen line is in use, choose a line pool with several lines in it.

The system does not check that the number you give for line redirection is a valid one. If you redirect to an invalid number, redirection fails. Using an autodial button to enter the redirection number helps avoid this possibility. An autodial button used for line redirection must be programmed to use a specific line.

Canceling Line Redirection

ƒ£°›

1.Press ƒ£°›.

2.Select the lines you no longer want to be redirected.

Allowing a telephone to redirect calls

You can turn a telephone’s ability to redirect calls on and off.

You need the programming template found at the front of this guide. See “Getting started with Norstar” on page 1 for more information.

1.Press ƒ••¤flfl‹››.

2.Press ¤‹fl›fl(the default System Coordinator password).

3.Press ≠and enter the internal number of the telephone you want to program.

4.Press ≠twice.

5.Press “four times. The display reads

Allow redirect:.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide