Nortel Networks Modular ICS 4.0 manual Programming Automatic Time and Date, Invalid Password

Using System features / 189

Displays

Invalid Password

(Blank display) Enter your password. It is not shown on the display.

You have entered a password that is not programmed into your system.

Programming Automatic Time and Date

You can program your Norstar system with the Automatic Time and Date feature to automatically update the time and date. Whenever the clock is out of sync by more than two minutes, as a result of a power failure or a loss of power, the first incoming call updates the clock automatically after two rings.

Note: CLASS Trunks are required for this feature to work. Consult your customer service representative to determine if you have CLASS Trunks.

This feature also allows the automatic changing between North American daylight savings and standard time. Your system uses the time and date information from the first incoming call after two rings to update to daylight savings or standard time.

The Automatic Time and Date feature automatically overrides any manually programmed changes to the time and date in your system.

Note: The year is not included with the time and date information and must be programmed manually if the current year differs from the network time.

1.Place the programming overlay on any M7310 or M7324 telephone.

2.Press ƒ••¤flfl‹››(CONFIG). The display shows Password:.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide